How to Reconfigure the Terminal Server By ***FAR*** the easiest way to reconfigure the terminal server is to execute the command file USER:[RTM]REPROGRAM_LANTRONIX.COM If this doesn't work, try the following: The Lantronix manual explains how to give the commands to change a characteristic of the terminal server. Basically one just gives "set" and "define" commands - "set" changes the current characteristics, and "define" changes the permenant ones. For example, to change the baud rate of port 3 to 19200 one would type Local_xx>> set port 3 speed 19200 You must make yourself a privileged user. The manual explains how to do that. The list of junk below shows the characteristics of all the services and ports that must be defined in order for normal observing to take place. Local_19>> show serv galil char Service: ANT_SERIAL Ident: Rating: 0 Ports: 3 Characteristics: Queueing Rtel Connections FormFeed NetWare Lat SOJ: EOJ: Enabled Groups: 0 Local_19>> show serv wwv char Service: WWV Ident: Rating: 255 Ports: 4 Characteristics: Queueing Rtel Connections FormFeed NetWare Lat SOJ: EOJ: Enabled Groups: 0 Local_19>> show serv gps char Service: GPS Ident: Rating: 255 Ports: 6 Characteristics: Queueing Rtel Connections FormFeed NetWare Lat SOJ: EOJ: Enabled Groups: 0 Local_19>> show serv laser_writer char Service: LASER_WRITER Ident: Rating: 0 Ports: 7 Characteristics: Queueing Rtel Connections FormFeed NetWare Lat SOJ: EOJ: Enabled Groups: 0 Local_19>> show serv tau char Service: TAU Ident: Rating: 0 Ports: 8 Characteristics: Queueing Rtel Connections FormFeed NetWare Lat SOJ: EOJ: Enabled Groups: 0 Local_19>> sho port 2 Port 2 : Username: Physical Port 2 (Idle) Char Size/Stop Bits: 8/1 Input Speed: 9600 Flow Ctrl: Xon/Xoff Output Speed: 9600 Parity: None Modem Control: None Access: Remote Local Switch: None Backward: None Port Name: Port_2 Break Ctrl: Local Session Limit: 4 Forward: None Terminal Type: Soft() Preferred Services: (Lat) (Telnet) Authorized Groups : 0 (Current) Groups : 0 Characteristics: Telnet Pad Local_19>> sho port 3 Port 3 : Username: Physical Port 3 (Job Service) Char Size/Stop Bits: 8/1 Input Speed: 19200 Flow Ctrl: Xon/Xoff Output Speed: 19200 Parity: None Modem Control: None Access: Remote Local Switch: None Backward: None Port Name: Port_3 Break Ctrl: Local Session Limit: 4 Forward: None Terminal Type: Soft() Preferred Services: (Lat) (Telnet) Authorized Groups : 0 (Current) Groups : 0 Characteristics: Telnet Pad Local_19>> sho port 4 Port 4 : Username: Physical Port 4 (Idle) Char Size/Stop Bits: 8/1 Input Speed: 9600 Flow Ctrl: Xon/Xoff Output Speed: 9600 Parity: None Modem Control: None Access: Remote Local Switch: None Backward: None Port Name: Port_4 Break Ctrl: Local Session Limit: 4 Forward: None Terminal Type: Soft() Preferred Services: (Lat) (Telnet) Authorized Groups : 0 (Current) Groups : 0 Characteristics: Telnet Pad Local_19>> sho port 6 Port 6 : Username: Physical Port 6 (Idle) Char Size/Stop Bits: 8/1 Input Speed: 9600 Flow Ctrl: Xon/Xoff Output Speed: 9600 Parity: None Modem Control: None Access: Remote Local Switch: None Backward: None Port Name: Port_6 Break Ctrl: Local Session Limit: 4 Forward: None Terminal Type: Soft() Preferred Services: (Lat) (Telnet) Authorized Groups : 0 (Current) Groups : 0 Characteristics: Telnet Pad Local_19>> sho port 7 Port 7 : Username: Physical Port 7 (Job Service) Char Size/Stop Bits: 8/1 Input Speed: 9600 Flow Ctrl: Xon/Xoff Output Speed: 9600 Parity: None Modem Control: None Access: Remote Local Switch: None Backward: None Port Name: Port_7 Break Ctrl: Local Session Limit: 4 Forward: None Terminal Type: Soft() Preferred Services: (Lat) (Telnet) Authorized Groups : 0 (Current) Groups : 0 Characteristics: Telnet Pad Local_19>> sho port 8 Port 8 : Username: Physical Port 8 (Job Service) Char Size/Stop Bits: 8/1 Input Speed: 9600 Flow Ctrl: Xon/Xoff Output Speed: 9600 Parity: None Modem Control: None Access: Remote Local Switch: None Backward: None Port Name: Port_8 Break Ctrl: Local Session Limit: 4 Forward: None Terminal Type: Soft() Preferred Services: (Lat) (Telnet) Authorized Groups : 0 (Current) Groups : 0 Characteristics: Telnet Pad