Differences
This shows you the differences between two versions of the page.
|
cso:safety:hot_work [2011-01-31 03:02] sradford created |
cso:safety:hot_work [2011-01-31 03:02] (current) sradford |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ====== Hot Work Procedure ====== | ||
| + | |||
| + | **Scope**\\ | ||
| + | Contractors and Maintenance projects being performed at the CSO Base Facility or at the Summit site. | ||
| + | |||
| + | **Responsible Party**\\ | ||
| + | Contractors or Maintenance Personnel performing Hot Work. | ||
| + | |||
| + | **Technical Manager or Day Crew Leader**\\ | ||
| + | Will issue hot work permits to responsible parties. | ||
| + | |||
| + | **Procedure**\\ | ||
| + | Hot Work permits shall be obtained before commencement of any operations involving metal burning, cutting, welding, brazing, and/or any procedure that produces sparks and heat. The applicable regulations currently in effect shall be followed. For all hot work, without exception, the General Contractor or Maintenance Employee shall: | ||
| + | - Obtain hot work permit. | ||
| + | - Clear the area of any combustible materials. | ||
| + | - Have a fire extinguisher standing by. | ||
| + | - Inspect the area for fire after hot work for has been performed. | ||
| + | - Re-inspect the area at least one hour after the hot work has been completed for any signs of fire or the potential of fire. | ||
| + | |||
| + | **Completion**\\ | ||
| + | When the hot work final inspection is completed, the responsible party shall return a signed Hot Work Permit to the Issuer. | ||
| + | |||
| + | R. A. Chamberlin, Manager\\ | ||
| + | 2005 June 29\\ | ||
| + | (Adapted from CIT campus procedures.) | ||
| + | |||
